Skip to main content

Inventory Device Whip

The Inventory Device WhipWHIP APIendpoints providesprovide accessremote todevice specializedmanagement whipcapabilities, inventory devices within the Zequenze control system. This endpoint allowsallowing you to retrieveexecute detailedcritical informationoperations abouton individualnetwork whipdevices devices,through includingthe theirWHIP specifications,(Web-based operationalHardware status,Interface Protocol). These endpoints enable administrators to perform essential maintenance tasks like reboots, factory resets, and configuration details.synchronization remotely.

Base URL: https://control.zequenze.com/api/v1

Authentication: All endpoints require a Bearer token:

Authorization: Bearer <your-api-token>

Overview

The Inventory Device WhipWHIP API category is designed for managingremote anddevice monitoringmanagement specializedoperations whipwithin devicesyour innetwork industrialinfrastructure. control environments. These devices are typically used for flexible mechanical connections, cable management, or specialized control applications where dynamic movement is required.

This API categoryallows focusesnetwork administrators and automated systems to perform critical maintenance operations on retrievingmanaged detaileddevices informationwithout aboutrequiring individualphysical whipaccess.

The WHIP (Web-based Hardware Interface Protocol) integration enables you to execute various device operations remotely, including system reboots, factory resets, configuration synchronization, and device reconfiguration. This is particularly valuable for managing distributed network infrastructure, IoT devices, includingor theirequipment in remote locations where physical specifications, current operational status, maintenance records, and configuration parameters. The endpointaccess is essentiallimited foror inventory management systems, maintenance scheduling, and operational monitoring of whip devices across your infrastructure.costly.

Key conceptsOperations to understand:Available:

  • Whip DevicesReboot: SpecializedPerform flexiblea devicessoft usedrestart inof industrialthe applicationsdevice
for dynamicFactory connectionsReset: Reset device to factory defaults (preserves network connectivity) Device IDFactory Reset: UniqueComplete identifierfactory forreset eachincluding whipnetwork device in your inventorysettings StatusConfiguration TrackingSync: Real-time monitoring ofSynchronize device operationalconfiguration statewith andthe healthcentral management system SpecificationDevice ManagementReconfigure: AccessApply new configuration parameters to technicalthe specificationsdevice

This API is commonly used in network operations centers (NOCs), automated maintenance workflows, and configurationdevice detailslifecycle management systems.

Endpoints

GET /inventory_device_whip/{id}/

Description: Retrieves detailedthe informationcurrent aboutWHIP operation status or initiates a device operation for a specific whipinventory device by its unique identifier.device. This endpoint returnsserves comprehensiveas databoth includinga devicestatus specifications, current status, location, maintenance history,checker and configurationoperation parameters.trigger, Usedepending thison endpointhow whenit's youcalled. needThe completeoperation informationparameter aboutdetermines awhich specificremote whipaction devicewill forbe monitoring,performed maintenance,on orthe inventorytarget management purposes.device.

Use Cases:

  • RetrievingRemotely reboot unresponsive network devices
Perform scheduled factory resets during maintenance windows Synchronize device detailsconfigurations forafter maintenancepolicy schedulingupdates CheckingReconfigure operationaldevices with new network parameters Check the status of a specific whipongoing device Gathering specifications for replacement or upgrade planning Audit and compliance reporting for specific devicesoperations

Full URL Example:

https://control.zequenze.com/api/v1/inventory_device_whip/42/12345/?operation=reboot

Parameters:

Parameter Type In Required Description
id integer path Yes UniqueThe unique identifier of the whipinventory device to retrieveperform the operation on
operation string query No The operation to perform on the device. When provided, triggers the specified action

Operation Values:

Value Description reboot Performs a soft reboot of the device while preserving all configurations factory Resets device to factory defaults but maintains network connectivity settings device_factory Complete factory reset including all network and configuration settings sync Synchronizes the device configuration with the central management system reconf Applies new configuration parameters and reconfigures the device

cURL Example:

curl -X GET "https://control.zequenze.com/api/v1/inventory_device_whip/42/"12345/?operation=reboot" \
  -H "Authorization: Bearer YOUR_API_TOKEN" \
  -H "Content-Type: application/json"

Example Response:

{
  "id": 42,12345,
  "operation": "reboot",
  "status": "initiated",
  "device_info": {
    "device_id": 12345,
    "device_name": "Whip-Control-Unit-042"switch-floor-2-east",
    "device_type": "network_switch",
    "serial_number": "WCU-2024-042-XZ"SW2E-8845-XXYY",
    "model"ip_address": "FlexConnect Pro 3000"192.168.2.45",
    "manufacturer"location": "IndustrialBuilding DynamicsA Corp"- Floor 2 East"
  },
  "operation_details": {
    "initiated_at": "2024-01-15T14:30:00Z",
    "estimated_completion": "2024-01-15T14:32:00Z",
    "operation_id": "op_67890abcdef"
  }
}

Status Check Example (without operation parameter):

curl -X GET "https://control.zequenze.com/api/v1/inventory_device_whip/12345/" \
  -H "Authorization: Bearer YOUR_API_TOKEN" \
  -H "Content-Type: application/json"

Status Response Example:

{
  "id": 12345,
  "operation": "reboot",
  "status": "operational"completed",
  "location"last_operation": {
    "facility"operation_type": "Manufacturing Plant A"reboot",
    "zone"initiated_at": "Production Line 3"2024-01-15T14:30:00Z",
    "coordinates"completed_at": "A3-L2-R4"2024-01-15T14:31:45Z",
    "result": "success",
    "operation_id": "op_67890abcdef"
  },
  "specifications"device_info": {
    "length_mm"device_id": 1500,12345,
    "diameter_mm": 25,
    "material"device_name": "reinforced polymer"switch-floor-2-east",
    "operating_temp_range"online_status": "-20°C to 85°C"online",
    "pressure_rating": "150 PSI",
    "bend_radius_mm": 75
  },
  "operational_data": {
    "current_status": "active",
    "uptime_hours": 8760,
    "last_maintenance"last_seen": "2024-01-15T08:00:00Z",
    "next_maintenance_due": "2024-04-15T08:00:00Z",
    "operational_cycles": 14500015T14:32:15Z"
  },
  "installation_info": {
    "installed_date": "2023-01-15T10:00:00Z",
    "installed_by": "Tech Team Alpha",
    "warranty_expires": "2026-01-15T23:59:59Z"
  },
  "configuration": {
    "max_flex_angle": 180,
    "response_time_ms": 50,
    "control_protocol": "ModBus RTU",
    "firmware_version": "v2.1.4"
  },
  "organization_id": 1001,
  "created_at": "2023-01-15T10:00:00Z",
  "updated_at": "2024-01-20T14:30:00Z"
}

Response Codes:

Status Description
200 Success - ReturnsOperation theinitiated whipor devicestatus dataretrieved successfully
400 Bad Request - Invalid operation parameter or malformed request 401 Unauthorized - Invalid or missing API token 404 Not Found - Whip device with specifiedDevice ID does not exist or is not accessible 403409 ForbiddenConflict - InsufficientAnother permissionsoperation tois accesscurrently in progress on this device 503 Service Unavailable - Device is offline or unreachable

Common Use Cases

Use Case 1: DeviceAutomated StatusNetwork MonitoringMaintenance

MonitorSchedule periodic reboots of network devices during maintenance windows to prevent memory leaks and ensure optimal performance. Use the operationalreboot statusoperation ofintegrated critical whip devices inwith your production environment. Use this endpoint to check device health, uptime, and operational cycles for preventive maintenance planning.scheduling system.

Use Case 2: MaintenanceConfiguration SchedulingDrift Remediation

RetrieveWhen devicemonitoring maintenancesystems historydetect andconfiguration scheduledrift, upcoming maintenance based on operational cycles, uptime hours, and manufacturer recommendations stored inuse the devicesync record.operation to restore devices to their intended configuration state without manual intervention.

Use Case 3: InventoryDevice AuditingDeployment and Provisioning

PerformDuring comprehensivedevice inventoryreplacement auditsor new deployments, use device_factory followed by retrievingreconf detailedto specifications,ensure installationdevices information,start with a clean state and currentreceive the correct configuration for their location data for compliance and asset management purposes.role.

Use Case 4: ReplacementEmergency PlanningRecovery Operations

AccessWhen completedevices devicebecome specifications and operational data to plan for device replacements, upgrades,unresponsive or capacitymisconfigured, expansionuse the appropriate factory reset operation (factory or device_factory) based on performancewhether metricsnetwork andconnectivity wearneeds patterns.to be preserved for remote recovery.

Use Case 5: TechnicalBulk DocumentationConfiguration Updates

GenerateAfter technicalupdating documentationnetwork andpolicies reportsor bysecurity retrievingsettings, comprehensiveuse devicethe informationreconf includingoperation specifications,across configurationmultiple parameters,devices andto installationensure details.consistent policy enforcement throughout your infrastructure.

Best Practices

  • CachingOperation Sequencing: Cache device informationWait for frequentlycompletion accessedof devicesone tooperation reducebefore APIinitiating calls,another but refreshon the cachesame periodicallydevice. toCheck ensureoperation status informationusing remainsthe currentendpoint without parameters.

  • Error Handling: AlwaysImplement implementretry properlogic errorwith handlingexponential backoff for operations that fail due to gracefullytemporary managenetwork casesissues. whereMonitor devicesfor may409 havestatus beencodes decommissionedindicating orconflicting movedoperations.

  • Maintenance Windows: Schedule disruptive operations (factory resets, reboots) during planned maintenance windows to minimize service impact.

Monitoring Integration: Integrate thisWHIP endpointoperations with your network monitoring systemssystem to track device statusrecovery changesafter operations and triggerdetect alertsany forissues.

maintenance requirements

Security: Ensure proper access controls are in place, as device information may contain sensitive operational and security details

Rate Limiting: Be mindful of API rate limits when polling multiple devices for status updates; consider implementing batch operations where possible Data ValidationDocumentation: Always validatelog WHIP operations with timestamps and reasons for audit trails and troubleshooting purposes.

Timeout Handling: Set appropriate timeouts for operations. Reboots typically complete in 2-3 minutes, while factory resets may take 5-10 minutes depending on the device IDtype.

before making requests

Batch Operations: When performing the same operation on multiple devices, implement parallel execution with reasonable concurrency limits to avoid unnecessaryoverwhelming 404the errorsmanagement andinfrastructure.

improve application performance
Back to top